Grinding disc chainsaws use their speed and maneuverability to cut, engrave, remove and engrave wood, plastic, ice and hard rubber. The chain saw blade is fixed between the two steel plates to provide a firm grip for engraving. Whether it's a texture or a knot, the blade can easily cut the material onto the user.
Our 22-tooth design provides a smooth finished surface that is very useful for the smallest sanding that follows.
Chains can be sharpened with a chain saw file or replaced as needed.
It is ideal for bending work, such as inside the bowl, for quick removal of waste.
Warning: It is not recommended to use the switch lock function on any grinder. Doing so can cause serious injury or even death.
Diameter: about 4"/ 100mm
Tool bar: about 5/8" /16mm
Maximum speed: maximum speed 14000rpm
Tool bar size: about 16MM (3/5")
Diameter: about 102MM (4")
Maximum speed (rpm): 25000
Wheel thickness:about 0.5cm/0.2in
It is suitable for 4"/ 100mm or 4-1 / 2" /115mm angle grinders.
1 x grinder disc and chain
Please allow for 2-3mm error due to manual measurement
The colors in the photos displayed on the computer monitor may vary slightly because the monitors are not calibrated as the same.